Customer build
2018 Mercedes-AMG GT R on TW022 Two-Piece Wheels
FcForged / Customer builds
Two-piece wheel projectThis 2018 Mercedes-AMG GT R runs TW022 split-spoke two-piece wheels in a staggered setup: 19 × 10-inch wheels at the front and 20 × 12.5-inch wheels at the rear. Three photographs show the car from the front, the side and the rear.
- Front wheels
- 19 × 10 ET46
- Rear wheels
- 20 × 12.5 ET38
01 / The wheel setup
TW022 Two-Piece Wheels: Front and Rear Specs
The front wheels measure 19 × 10 inches with ET46 offset; the rear wheels measure 20 × 12.5 inches with ET38 offset. Both use a 5 × 112 mm bolt pattern and a 66.5 mm center bore, with an electroplated gray face and an electroplated silver lip.
| Vehicle | 2018 Mercedes-AMG GT R |
|---|---|
| Wheel design | TW022 split-spoke forged wheels |
| Wheel construction | Two-piece |
| Front wheels | 19 × 10 inches · ET46 |
| Rear wheels | 20 × 12.5 inches · ET38 |
| Bolt pattern (PCD) | 5 × 112 mm |
| Center bore | 66.5 mm |
| Finish | Electroplated gray face, electroplated silver lip |
The front and rear wheels differ in both diameter and width. These dimensions describe this particular build; they are not a fitment recommendation for every AMG GT R. For another vehicle, review the proposed wheel dimensions alongside the tire sizes, brakes, suspension, and intended use.
02 / A closer look
Three Views of the Build
The front three-quarter view shows the split-spoke faces against the matte gray bodywork and yellow brake calipers. The side profile shows the difference between the 19-inch front and 20-inch rear wheels. The rear three-quarter view shows the wider rear wheel and its reflective outer lip.
These views provide an appearance reference for a custom wheel discussion. Point out the spoke pattern, finish, and outer-lip details you want to explore, rather than relying on the dimensions alone. The photographs do not establish tire clearance or road performance.