Customer build
2018 BMW M3 Competition on Polished Two-Piece Wheels
A white 2018 BMW M3 Competition with polished two-piece wheels, a staggered 20-inch setup, and detailed views of the finished build.
FcForged / Customer builds
Two-piece wheel projectThis 2018 BMW M3 Competition pairs polished two-piece wheels with white bodywork and a staggered 20-inch setup. The build uses 20 × 10.5-inch front wheels and 20 × 11.5-inch rear wheels. Two photographs show the overall appearance and a close view of the rear wheel.
- Front wheels
- 20 × 10.5 ET8
- Rear wheels
- 20 × 11.5 ET22
01 / The wheel setup
Polished Two-Piece Wheels: Front and Rear Specs
The front wheels measure 20 × 10.5 inches with ET8 offset; the rear wheels measure 20 × 11.5 inches with ET22 offset. Both use a 5 × 120 mm bolt pattern, a 72.6 mm center bore, and a polished finish.
| Vehicle | 2018 BMW M3 Competition |
|---|---|
| Wheel construction | Two-piece |
| Front wheels | 20 × 10.5 inches · ET8 |
| Rear wheels | 20 × 11.5 inches · ET22 |
| Bolt pattern (PCD) | 5 × 120 mm |
| Center bore | 72.6 mm |
| Finish | Polished |
The wider rear wheels distinguish this staggered setup. These dimensions describe this particular build; they are not a fitment recommendation for every M3 Competition. For another vehicle, review the proposed wheel dimensions alongside the tire sizes, brakes, suspension, and intended use.
02 / A closer look
From the Full Build to the Wheel Details
The full-car photograph shows the polished wheels against the white bodywork and dark exterior trim. The rear-wheel close-up shows the closely spaced spokes, center area, and reflective outer lip in more detail.
These views provide an appearance reference for a custom wheel discussion. Point out the spoke pattern, finish, and outer-lip details you want to explore, rather than relying on the dimensions alone. The photographs do not establish tire clearance or road performance.